HITEC Aurora 9X - Manual (Page 94)

9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
94
FLT.COND (ACRO)
FLT.COND Flight Conditions
Spoiler Spoiler control
SPO- ELE Spoiler to Elevator mix
AIL-RUD Aileron to Rudder mix
ELE-CAM Elevator to Camber mix
RUD-AIL Rudder to Aileron mix
AIL DIFF Aileron Differential feature
AIL- FLP Aileron to Flap mix
CAMBMIX Wing trailing edge mix
FLP CON Flap control mix
V.Tail V-Tail mix feature
AILEVATR Split elevator and aileron inclusion mix
Elevon Elevon or flying wing mix
Thro.Cut Throttle cut position
T.Curve Throttle curve
IdleDown Throttle Idle down position
B-fly Butterfly or “Crow” mix
FlapTrim Flap Trim Mix ACRO only
Knifemix Knife Edge Mix ACRO only
SnapRoll Snap roll function ACRO only
Offset Offset function GLID only
Motor Glider motor control feature GLID only
Launch Launch mix GLID only
The following features are common to the ACRO and GLID model programs. Depending on the active models features
as you defined them during the model set-up process, these functions may, or may not be in the model menu.
You are not obligated to use the flight condition feature to fly an aircraft.
Note
Flight Conditions
The Flight Condition feature is clearly the most sophisticated and flexible of all the Aurora 9X functions.
There are 7 flight conditions, condition 2 through 8. This is in addition to the NORMAL condition for a total of 8 different
flight conditions you can program for the active model’s memory.
As you read the manual, note this graphic appears at the end of the description text on the following functions:
### This function can be influenced by the flight condition feature ###
The following Aurora 9X features support flight condition programming in ACRO and GLID.
1. Dual Rate & Exponential
2. Servo Speed
3. Programmable Mixes
4. Throttle Curve
5. Fuel Mixture
6. Spoiler to Elevator Mix
7. Aileron to Rudder Mix
8. Elevator to Camber Mix
9. Rudder to Aileron Mix
10. Aileron Differential
11. Aileron to Flap Mix
12. Camber
Mix
13. Launch
14. Flap
Control
15. Gyro Sensitivity
16. Snap-Roll
17. V-tail
Mix
18. Elevon Mix
19. Ailevator Mix
20. Knife Edge Mix
Model Menu-Common Model Functions to ACRO and GLID
S
ec
tion Six