HITEC Aurora 9X - Manual (Page 105)

9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
105
ELE-CAM (ACRO and GLID)
d. The Aurora 9X offers a 7 point curve on many
of our adjustable mix menu items. To adjust
the travel values, move the corresponding
control stick or slider to align the moving line
with the point you wish to adjust. Press the
+ or - icon to adjust to the desired curve points.
If you wish to inhibit any curve points, press
the RST icon. It is necessary to inhibit the #2, 3,
5 and 6 points, and to just adjust points 1 and 7
equally to achieve a linear curve.
e. Click the arrow icon to set the values of the
flap (If flap exits).
f. Again use the +RST- icon to set the value for
the flaps. Note the flaps will only appear as an
option if you told the radio your model had
flaps when it was set up.
g. Select the Exit icon to return to the model
menu.
Switch type Function Trim link
2 position On or Off Yes. T.APP
Switch Option and In–Flight Fine Trim Adjustment Switch Function
c. To select a 2 position switch that will turn the mix on and off, select an “in-flight” ADJUSTMENT switch, and choose to activate the trim
link, press
NULL and follow the switch activation process.
Elevator to Camber Mix.
The elevator to camber mix allows the model to drop and raise the entire trailing edge of your models wing control
surfaces as the elevator is used.
As in many of the Aurora 9X’s model menu options, there are several airframe variables that are selected and appear in
the different menu screens. In the case of the elevator to camber mix, the number of flaps and ailerons will appear as a
variable based on the airframe type you told the radio you had at the time of initial model set-up in the system menu.
### This function can be influenced by the flight condition feature ###
a. Select ELE-CAM from the model menu.
b. Press ACT to activate the mix.