HITEC Aurora 9X - Manual (Page 14)

9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
Hitec 2.4GHz System
MAXIMA 6 MAXIMA 9
CH1
CH2 CH3
CH4
CH5
CH6 CH7
CH8
BA T/9
Maxima Series Receiver Features
The Maxima series is designed for use with the Aurora 9X. The older Aurora 9 transmitter cannot be used with the
Maxima series receiver. USE ONLY Digital SERVOS with the Maxima receivers. Analog servos cannot be used with the
Maxima series receivers.
Caution C ti C ti C ti C ti C ti C ti C ti C ti C ti ti ti ti ti ti ti ti tiiiiiiiiiiiiiiiii
The Aurora 9X features our latest robust 2.4GHz AFHSS signal. It is capable of transmitting both our G1 AFHSS technology with the
Optima and Minima receivers as well as our G2 AFHSS high frame rate, low latency technology with the Maxima receiver series.
Additionally, the Aurora 9X can transmit SLT 2.4GHz protocol, making it compatible with the numerous Tx-Ready™ airplane models.
1. Function Button
- Used for binding the receiver to the Aurora 9X and entering the FAIL-SAFE or Hold feature.
2. Dual LED Status Indicator
- Indicates the set-up process codes and current status of the receiver.
3. Channel Output and Battery Input Ports
- The ports for battery power input and servos, gyros and other accessories’ output ports are located at the
side end of the Maxima receivers.
4. Low Battery Warning
- If the receiver's battery levels fall below 3.6V, the RED LED will flash.
5. FAIL-SAFE/Hold Mode Selectable
- Servos and other accessories position can be set with a FAIL-SAFE point, if power to the receiver is lost.
14