HITEC Aurora 9X - Manual (Page 76)

9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
Selecting a Switch
Many of the Aurora 9X features can be placed on a switch to turn the feature on / off, or provide multiple values to a
function like dual and exponential rates.
To avoid repeating the switch selection process throughout the manual, we are presenting it in its entirety in this section. Here you
will learn to program the following Aurora 9X switch features:
1. The NULL condition
2. Two and three position switch selection
3. Adjust function switch set-up
Camber and launch menus
Heli throttle and pitch curve adjust function
4. Trim link activation
Adjust to trim
T.APP, (trim link)
5. Cut Function set-up
Launch
cut
On and Off
Turn a function on or off, as when used with a switchable feature like aileron to rudder mix, the mix is either on and using the movement
values you programmed for the aileron rudder mix, or the mix is turned off.
Multiple Rate Values
Other functions like dual rates allow you to use multiple movement rate values for different switch positions. For example, using a three
position switch, you can program a different “rate” of movement for each switch position.
1. The NULL condition
The functions that you program into the Aurora 9X will be “on” all the time, noted as NULL on the specific features menu screen. Almost
all of the Aurora 9X programming functions can be toggled on or off, using a two position switch, or several different values can be
applied to some functions using two and three position switches. While still other functions like Camber are applied to a slider and their
movement dialed-in as needed.
2. Two and three position switch selection
There are both two and three position switches on the Aurora 9X. They are used to do two things, turn a function on and off or, each
switch position can be a travel rate value on multiple rate value functions.
The question you must answer almost every time you program an Aurora 9X function will be;
“Do I want to place this function on a switch?”
No
*GZPVXBOUUIFQSPHSBNNFEGFBUVSFUPCFiPOwBMMUIF
time, DO NOT apply a switch to the programmed
function. Leave it in the NULL condition. Yes
*GZPVXBOUUPUVSOUIFGVODUJPOPOBOEPò
PS
program multiple rate values, apply a switch to the
function.
Model Menu and More - The Switch Selection Process
76