Hanna Instruments HI 8050 User Manual

Page 47

− Link

Link

Link - The selectable program (number) after which the filter-cleaning pro-

gram is activated.

− FFFFFilter Number

ilter Number

ilter Number - Panel index. Two filter selectable.

− Clean on alarm

Clean on alarm

Clean on alarm - The filter-cleaning program can be set to be activated

by an alarm condition alone or in addition to being linked to a specific
program. Enter Y (yes) or N (no).

− Clean time

Clean time

Clean time - Selectable work duration for the indexed filter cleaning program.

SET AGITATORS – S46 (Only for HI8050)

Pre 00:33 Prog 08

Work 00:10

Pause 00:05

SET AGITATORS S46

The agitators can be activated before dosing the fertilizer, during dosing, or
intermittently throughout the program. If ‘Pre’ is set, the agitator will activate
prior to dosing. If ‘Work’ is set without ‘Pause’ the agitator will work through-
out the lifetime of the program. If ‘Work’ and ‘Pause’ are set the agitator will
function intermittently relative to the time settings. In this panel the program
number is used as the index.
This panel displays and allows the setting of the following parameters:
− PPPPPre

re - The selectable pre-activation time for the agitator. The pre-agitation is

done only if the program has pre-irrigation and during that period.

− Program Number

Program Number

Program Number - Reflects the selected program (can be selected only

inside panel C04).

− W

Work

ork

ork - The selectable activation time for the indexed agitator. Working time

during irrigation.

− PPPPPause

ause

ause - The selectable pause time following work time setting.

MANUAL START – S47

Active program: 03

Start program: -- ?

PROG MAN START S47

Each program can be manually started using this panel. If certain alarm condi-
tions are present such as “no water supply”, a program cannot be started by any
means. This panel displays and allows the setting of the following parameters:
− Active program

Active program

Active program - The currently active program.

− Start program

Start program

Start program - The program selected for activation. User selectable.

This manual is related to the following products:

HI 8060