Hanna Instruments HI 8050 User Manual

Page 18

ENTER

ENTER key is pressed and data confirmed, the controller reverts to con-
sulting mode. The SET

SET

SET key must be pressed to re-enter setting mode.

− ESC

ESC

ESC key cancels new data entered in the currently focused data object

and exits the setting mode. The change of data is not saved in the current
object and the previous setting is maintained.

NOTE

TE: Data that has been changed in an editable data object is saved

once focus has been removed from that object by pressing the ARROW

ARROW

KEYS

KEYS or TTTTTAB

AB.

PANELS BROWSING METHODS

ANELS BROWSING METHODS

In consulting mode, 2 browsing methods are available to view each of the
68 panels (screens) of the Fertigation controller.
− Step

Step

Step-by

-by

-by-----step browsing

step browsing

step browsing: pressing PPPPPA

AAGE UP

GE UP

GE UP and PPPPPA

AAGE DOWN

GE DOWN

keys allows consecutive navigation from one panel to the next. Direction
is dependent upon which key is selected.

− Direct access browsing

Direct access browsing

Direct access browsing: the number of the desired panel can be

entered directly using the panel number located on the bottom right cor-
ner of every panel, prefixed by a C

C or SSSSS. The panel number object is the

initially focused object on each screen. After entering the value by using
the key pad and arrow keys

arrow keys

arrow keys, press the ENTER

ENTER

ENTER key to view the selected

panel.

NOTE

TE:

: :

: : If a panel is selected and the SET

SET

SET key is pressed, entering the

setting mode, both browsing methods are disabled.

This manual is related to the following products:

HI 8060