Hanna Instruments HI 8050 User Manual

Page 26

− Program Number

Program Number

Program Number - The active program is displayed. If no program is

active this field is not visible.

− pH sensor reading

pH sensor reading

pH sensor reading - The reading of pH sensor.

− Sector Numbers

Sector Numbers

Sector Numbers - All sectors assigned to the active program are dis-

played (cyclically) and only when an active program is running. If no
program is active no number is visible.

− EC sensor reading -

EC sensor reading -

EC sensor reading - The reading of EC sensor.

− System clock.

System clock.

If an alarm condition is present the time indication will also flash “ALARM”
to alert the user.

NOTE

TE::::: If the user is logged in and the operational mode is CONSUL

CONSUL

CONSULTING

TING

MODE

MODE, this panel can be accessed anytime and from any panel using the
HOME

HOME

HOME key as a shortcut.
NO

NOTE

TE::::: The Clock, pH and EC sensors are always visible regardless of state.

VOLUME STATE - C02

Irr:0114320L Prog:01

F1:00050L F2:00500L

F3:00370L F4:00000L

VOLUME STATE C02

The purpose of this panel is to allow the user to inspect the volumes of irriga-
tion water and fertilizers that have been dosed since the current program was
launched in execution. If the current program is not READY, ACTIVE or WAIT
in the place of volume values will be nothing. This panel contains the follow-
ing information:
− Program Number

Program Number

Program Number - the current program (the one for which the volume

values are).

− Irrigation volume

Irrigation volume

Irrigation volume – the volume of irrigation water.

− Fertilizer n volume

Fertilizer n volume

Fertilizer n volume – the volume of fertilizer from tank n.

SENSORS STATE – C03

Active Program: 04

06.3pH +22C

06.4mS 13:15

SENSORS STATE C03

This panel provides an overview of the real time values of the system sensors.

This manual is related to the following products:

HI 8060