FeiYu Tech FY-Panda2 Autopilot - Manual (Page 39)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 37
12.8 Auto landing
PandaⅡ system can select the method of the auto landing as ‖LINEAR‖or‖PARACHUTE . Select
―Menu---Autopilot Setting---Landing Setting‖to configurate the auto landing model and the altitude of
open parachute.
( 1 ) LINEAR
In order to realize the auto landing function you need to set 2 point to make sure the landing air
route before take-off. One is landing start point, move the plane which GPS position is good to the
starting point of the landing air route ,click the button ― ‖to set the landing start point
―A‖ .Then move the plane to the ending point of the landing air route, click the button
― ‖to set the landing end point ―B‖ .The auto landing air route is A-B, and point ―B‖
is the aircraft landing point. Point ―C‖ is the automatically generated downward spiral point during the
auto landing procedure. Automatic landing will consists of the following three stages.