FeiYu Tech FY-Panda2 Autopilot - Manual (Page 32)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 30
Step five :The cruise speed and hovering flight radius setting
Target speed setting (Default setting is 60km/h).The flight speed is very important, you can not
optional Settings. The speed must can keep aircraft keep normal flight. We suggest not increase the
settings too high, it may cause very unusual flying behavior and may result in damage of your aircraft
due to excessive throttling.
You can observe the "GPS velocity" on GCS software when in flight , and to evaluate the
aircraft's cruising speed.
Circle radius :It means the radius of the hovering flight .Speed of the plane which achieve 60
km/H , the circle radius should be set to more than 80 meters .We suggest that the circle radius
should be set more than 1.6 times of the flight
speed.Such as the speed of the plane in 100 km/H ,the circle radius suggest that set in 160
meters .If the circle radius is set too small , hovering flight may not be able to normal ,the plane will
decrease flight altitude, even cause the dangerous of air crash.