EXFO PM-1100 Optical Power Meter - Manual (Page 53)

Controlling Your Optical Power Meter Remotely
Optical Power Meter 43
Communication Parameters
Communication Parameters
Note: EOS means “End of String”. EOI means “End or Identify”.
For GPIB Communication
Terminate Read on EOS Yes
Set EOI with EOS on Writes Yes
Type of compare on EOS 8-bits
EOS byte 0Ah
Sens EOI at end of Writes Yes
GPIB Primary address See Setting the Optical Power Meter
for Remote Control on page 42
GPIB Secondary address None
For RS-232 Communication
EOS bytes 0Ah
Baud rate 9600 bps
Parity None
Data bits 8 bits
Stop bits 1 bits
Flow Control None
Activation See Setting the Optical Power Meter
for Remote Control on page 42