EXFO PM-1100 Optical Power Meter - Manual (Page 37)

Operating the Optical Power Meter
Optical Power Meter 27
Stopping the Acquisition
Stopping the Acquisition
Once the acquisition starts, it continues until the set duration has expired.
When the acquisition is over, the unit beeps, PRG STOP is displayed, and
the data is stored automatically. You can also terminate the acquisition
before the set duration has elapsed.
To stop the acquisition:
1. While the acquisition is in process, press Program.
2. Scroll (left/right arrows) to STOP.
3. Press ENTER.
I
MPORTANT
If you stop the acquisition before it ends, only the samples that
were taken before you stopped the acquisition will be saved.