beautypg.com

EXFO PM-1100 Optical Power Meter User Manual

Page 44

background image

Operating the Optical Power Meter

34

PM-1100

Customizing Your Optical Power Meter

To erase one wavelength from the shortlist:
1.
Press Setup.

2. Scroll (left/right arrows) to LAMBDA.

3. Scroll (up/down arrows) until the wavelength you want to delete

appears in the lower portion of the display.

4. Press ENTER. The wavelength will start flashing.

5. Set all the wavelength digits to zero (use the up/down arrows to

change the flashing digit and left/right arrows to activate the next digit).

Note: The wavelength that is currently active in absolute mode cannot be erased.

6. Press ENTER.

7. To exit the Setup menu, press Setup.

To erase all wavelengths from the shortlist:
1.
Press Setup.

2. Scroll (left/right arrows) to LAMBDA.

3. Scroll (up/down arrows) until DEL ALL appears in the lower portion of

the display.

4. Press ENTER.

5. To exit the Setup menu, press Setup.

Note: The wavelength that is currently active in absolute mode cannot be erased.