EXFO PM-1100 Optical Power Meter - Manual (Page 42)

Operating the Optical Power Meter
32 PM-1100
Customizing Your Optical Power Meter
Changing the Sampling Rate
You can set the number of samples taken by the PM-1100 every second: 0.1
(1 every 10 seconds), 0.5 (1 every 2 seconds), 1, 5, 10, 20, or 40.
Note: The maximum display refresh rate of the PM-1100 is 5 values every second,
no matter what sampling rate is selected.
To change the sampling rate:
1. Press Setup.
2. Scroll (left/right arrows) to SAMPLING.
3. Press ENTER. The current sampling rate starts flashing.
4. Scroll (up/down arrows) to select a new sampling rate (0.1, 0.5, 1, 5, 10,
20, or 40 per second).
5. Press ENTER.
6. To exit the Setup menu, press Setup.
Current
sampling rate