EXFO PM-1100 Optical Power Meter - Manual (Page 50)

Operating the Optical Power Meter
40 PM-1100
Customizing Your Optical Power Meter
Recalling a Configuration
Once you have saved a configuration (see Saving a Configuration on
page 39), you can recall it any time.
To recall a configuration:
1. Press Setup.
2. Scroll (left/right arrows) to RECALL.
3. Press ENTER. The configuration number (bottom of the screen) will
start flashing.
4. Use the up/down arrows to select the number of the configuration you
want to recall.
5. Press ENTER.
6. To exit the Setup menu, press Setup.
Configuration number