EXFO PM-1100 Optical Power Meter - Manual (Page 46)

Operating the Optical Power Meter
36 PM-1100
Customizing Your Optical Power Meter
Setting the Date
The date must be entered according to the year-month-day format.
To set the date:
1. Press Setup.
2. Scroll (left/right arrows) to DATE YMD.
3. Press ENTER. The first digit will start flashing.
4. Set a new date (use the up/down arrows to change the flashing digit
and the left/right arrows to activate the next digit).
5. Press ENTER.
6. To exit the Setup menu, press Setup.
Year Month Day