EXFO PM-1100 Optical Power Meter - Manual (Page 32)

Operating the Optical Power Meter
22 PM-1100
Erasing Manually Stored Data
Erasing Manually Stored Data
The manually stored data (up to 512) can only be erased as a group.
To erase the manually stored data:
1. Press Recall.
2. Scroll (left/right arrows) to CLR DATA.
3. Press ENTER.
4. To exit the Recall menu, press Recall.
I
MPORTANT
After you press ENTER, all the manually stored data in the 512
registers will be deleted without any other warning.