EXFO PM-1100 Optical Power Meter - Manual (Page 47)

Operating the Optical Power Meter
Optical Power Meter 37
Customizing Your Optical Power Meter
Setting the Clock
The time must be entered according to the 24-hour format.
To set the clock:
1. Press Setup.
2. Scroll (left/right arrows) to TIME.
3. Press ENTER. The first digit will start flashing.
4. Set a new time (use the up/down arrows to change the flashing digit
and the left/right arrows to activate the next digit).
5. Press ENTER.
6. To exit the Setup menu, press Setup.
Hour Minutes Seconds