EXFO FTB-610 Wideband Copper Test Module - Manual (Page 74)

Copper Tests: Using the Main Menu
66 FTB-610
Application Settings
Application Settings
Before executing the copper tests, set up the software settings and values
for the cables. The module allows you to save standard parameter settings
to different profiles and reuse them as needed.
To access Application Settings:
1. From the Main Menu, select Setup.
2. Tap App. Setting.
The page displays the following tabs:
General
The General tab allows you to configure the cable temperature, test
startup mode, report format, etc. for the application.
The page allows you to set the following parameters:

Cable Temperature specifies the temperature of the cable under test
in either F (Fahrenheit) or C (Celsius) units.