EXFO FTB-610 Wideband Copper Test Module - Manual (Page 139)

Multimeter Tests
Copper Test 131
Voltage Test
Setting Threshold Values
The Test Threshold page allows you to set the Threshold Voltage for each
pair.
To set the Threshold values:
1. From the Copper main menu Test Groups, select Multimeter test
.
2. From the Tests menu, select Voltage test.
3. Tap Continuous DC or Continuous AC tab for which you want to set
the Threshold values.
4. Tap Edit Thresholds button to open the Test Thresholds page.
5. Set the Threshold values as required.
6. Tap Close to confirm and exit the page.
The page allows you to set the following parameters:

Threshold is the threshold limit for each pair: Maximum, Minimum, or
None.

Threshold Voltage sets the threshold value.