EXFO FTB-610 Wideband Copper Test Module - Manual (Page 235)

Signal Test
Copper Test 227
WB Attenuation Test

Capacitance T/R to GND specifies a value for the capacitance per
length to ground constant.

Resistance specifies a value for the resistance constant of the cable.

Attenuation @ 300 kHz specifies a value for the reduction in signal
strength or insertion loss of the cable.

Velocity of Propagation read-only entry is the velocity of propagation
for the cable as a ratio of the speed of light. Setup in the Cable Book.

Cable Temperature allows you to change the temperature of the cable
under test in either degree C or F.
Summary
Summary tab displays the pass/fail status of the tests executed. Refer
Copper Tests: Result Summary on page 291 for more information.