EXFO FTB-610 Wideband Copper Test Module - Manual (Page 107)

Copper Test 99
8 Auto Test
Auto Test allows you to automatically run tests used in pre-qualification,
installation, and maintenance of different circuit types from POTS to
VDSL2.
POTS Auto Test
The Purpose of the POTS Auto Test is to quickly access the quality of the
pair to transmit voice. This test allows you to compare measured results
against stored threshold values to provide pass or fail status results of the
POTS circuit type. The line must be provisioned on a switch supporting
these test functions: drop battery, milliwatt tone, or quite line state.
To access POTS Auto Test:
1. From the Copper main menu Test Groups, select Auto Test
.
2. From the Tests menu, select POTS Auto Test to start the test.
By default, the POTS Auto page opens.