EXFO FTB-610 Wideband Copper Test Module - Manual (Page 156)

Multimeter Tests
148 FTB-610
Resistance Test
Setting Test Parameters
The Test Parameters page allows you to set the Multimeter Resistance
test parameters.
To set the Parameter values:
1. From the Copper main menu Test Groups, select Multimeter test
.
2. From the Tests menu, select Resistance test.
3. Tap Continuous tab to set the Parameter values.
4. Tap Edit Parameters button to open the Test Parameters page.
5. Set the Parameter values as required.
6. Tap Close to confirm and exit the page.
The page allows you to set the following parameters:

Selected Pair allows you to select the pair for which the cable
parameter is to be set.

Cable Type allows you to select a cable entry (with its associated
parameters) from the current Cable Book, to use for testing. The
selection is not saved when leaving the test. The current Cable Book
entry is shown by default.

Cable Temperature is the temperature in either degree C or F of the
cable under test.