Eurocom X8 - Manual (Page 314)

NVIDIA Video Driver Controls
C - 6 Configuring an External Display (NVIDIA)
C
Configuring an External Display (NVIDIA)
Clone the Displays
1. Attach your external display to the appropriate port, and turn it on.
2. Go to NVIDIA Control Panel (see page
C - 2
).
3. Double-click Display (if the sub-menus are not visible), and then click Set up
multiple displays
.
4. Any attached display will appear under “1.Select the displays you want to use.”
5. Click the check box alongside any display you wish to use.
6. Click Apply > Yes to save any changes made (the Apply button will appear in the
bottom right of the control panel when changes have been made).

Display Not Shown
If the attached display
does not appear in the
“1.Select the displays
you want to use.”
win-
dow, click “My Display
is not shown...”
and
then click the appropri-
ate button to force de-
tection of the missing
display.
HDMI Audio Setup
See “HDMI Audio Con-
figuration” on page C -
17
for instructions on
configuring audio for
HDMI display devices.
Figure C - 4
Set Up Multiple
Displays