Eurocom X8 - Manual (Page 266)

Modules
7 - 80 Intel® Rapid Start Technology Driver
7
9. Type “select disk #” (# is disk number where you want to create the store partition,
so refer to the results obtained from "list disk" for exact disk number).
10. The message “Disk # is now the selected disk.” will appear.
11. Type “create partition primary”.
12. A “DiskPart succeeded in creating the specified partition.” message should
appear.
Figure 7 - 63
Diskpart - Select
Disk #
Figure 7 - 64
Diskpart - Create
Partition