Changing the system from raid mode to ahci mode – Eurocom X8 User Manual

Page 293

Text mode
Original mode

Troubleshooting

Problems and Possible Solutions 8 - 23

Changing the System from RAID Mode to AHCI Mode

If you wish to change from a RAID mode to AHCI mode you will need to delete any existing RAID by following
the procedure below. However backup up any necessary files and data before deleting a RAID, as doing so will
result in the loss of all data on the RAID volumes.

1. Start-up your notebook computer and press to enter the BIOS.

2. Go to Intel(R) Rapid Storage Technology (in the Advanced menu) and press .

3. Go to the RAID (listed under RAID Volumes:) and press .

4. Select Delete and press .

5. Select “Yes” (note that al the data on the volumes will be lost) and press .

Figure 8 - 8

- Delete RAID (Advanced > Intel(R) Rapid Storage Technology)