Eurocom X8 - Manual (Page 295)

Troubleshooting
Problems and Possible Solutions 8 - 25
8
20. Type “select disk #” (the # is the number of the disk you wish to select and you will need to repeat the
procedure for any of your installed disks) and press .
21. The system will then prompt “Disk # is now the selected disk”.
22. Type “clean” and press .
23. The system will then clean the data from the selected disk.
24. Repeat the procedure for any other installed disks (type select disk # for any other disks).
25. After all the installed disks have been cleaned type “exit” to close diskpart.
26. Proceed with the Windows installation procedure (see your Windows documentation if you need help on
installing the Windows OS).
27. Install the Windows drivers from the Device Drivers & Utilities + User’s Manual disc as per
Table 4 - 1, on
page 4 - 3
(make sure you install the Intel Rapid Storage Technology driver).