Echelon LonTal Stack - Manual (Page 39)

LonTalk Stack Developer’s Guide 27
The following table lists the Neuron processor and memory combinations,
and it lists the application image files and tools that you use to program
each onto an Echelon Smart Transceiver or Neuron Chip
Echelon
Smart
Transceiver Memory
Type
Image File
Extension
Programming
Tool
Example
Programming
Tools
APB, NDL,
or NEI Network
management
tool
NodeLoad utility
OpenLNS CT
Neuron
3120E4 Chip On-chip
EEPROM
NFI PROM
programmer
A universal
programmer, such
as one from BPM
Microsystems or
HiLo Systems
APB or
NDL
Network
management
tool
NodeLoad utility
OpenLNS CT FT 5000
Echelon
Smart
Transceiver
Off-chip
EEPROM
(minimum
4K) or
flash. NME or
NMF EEPROM or
flash
programmer
A universal
programmer, such
as one from BPM
Microsystems or
HiLo Systems
In-circuit
programmer, such
as Total Phase™
Aardvark™
I2C/SPI Host
Adapter
Notes:
• Information about the NodeLoad utility and OpenLNS CT is available
from www.echelon.com .
• Information about BPM Microsystems programmer models is available
from www.bpmicro.com . The Forced Programming option in the menu is
provided only to refresh the internal memory contents and should not be
used to program new devices. In this mode, the programmer simply
reads out the contents of the memory and rewrites them.
• Information about HiLo Systems manual programmer models is available
from www.hilosystems.com.tw .
• Information about TotalPhase programmers is available from
www.totalphase.com .