Echelon i.LON 100 e2 Internet Server - Manual (Page 84)

7-8 Configuring the i.LON 100 Internet Server as an RNI
i.LON 100 Server Security in Chapter 6 for more information about the
Security Web page and security access reset.
• Enter the following command using the console application:
deactivate 4
4 is the index of the RNI application. Confirm that you want to disable the
RNI application. Disabling the RNI application may cause the i.LON 100
server to reboot. See Appendix A for more information about the console
application.
If you want to use the RNI capability of the i.LON 100 server at a later time, you
must remember to re-enable RNI, either by setting the Enable RNI option on
the Security Web page or by entering activate 4 in the console application.
If you are using a different L
ON W ORKS network interface and you wish to switch
to using the i.LON 100 server’s RNI capability, you must physically remove the
old network interface from the network.