Echelon i.LON 100 e2 Internet Server - Manual (Page 83)

i.LON 100 Internet Server User’s Guide 7-7
You can modify an i.LON 100 server’s settings later by selecting it from the list of
network interfaces, and clicking the Network Interface Properties button. You
can remove an i.LON 100 server from the Windows registry by selecting it from
the list, and clicking the Network Interface Remove button.
Switching Between i.LON 100 RNI and a Standard
L
ON
W
ORKS
Network Interface
If you are using the i.LON 100 server as an RNI and wish to switch to a different
L ON W ORKS network interface (e.g. a PCLTA-20, PCLTA-10, or PCC-10), but you
want to leave the i.LON 100 server attached to the network, you must disable the
RNI application on the i.LON 100 server before opening the network with the
new network interface. You can disable RNI in either of the following ways:
• Perform a security access reset, open the Security Web page, clear the
Enable RNI option, and reboot the i.LON 100 server. See