Echelon i.LON 100 e2 Internet Server - Manual (Page 52)

4-10 Configuring the i.LON 100
Persistent GPRS If this option is selected, the GSM modem will
request a network connection as soon as the i.LON
boots, and keep the connection open as long as the
service provider allows it.
User Name Legal Characters: All ASCII characters except
‘&’, ‘<’, and ‘>’.
Field Length: Up to 30 characters.
Enter the user name to be used by the i.LON 100
server when connecting to an ISP. By default, this
field is blank.
Password/Re-
enter Password
Legal Characters: All ASCII characters except
‘&’, ‘<’, and ‘>’.
Field Length: Up to 30 characters.
Enter and re-enter the password to be used by the
i.LON 100 server when connecting to an ISP. The
password will be displayed as all asterisks. By
default, this field is blank.
Set the Advanced checkbox to set the following additional options:
Remote DNS
Server
Enter the IP address of the DNS server to be used
when dialing out using this dial-out profile. Set
Obtain Automatically to obtain the DNS server
address from the PPP server when connecting.
Disconnect if Idle
For Legal Characters: Floating point number greater
than or equal to 0 and an increment of .1.
The idle timeout in seconds. If the connection is
idle for this length of time, the call will be ended.
By default, this value is 30.0 seconds.
Once a PPP connection is established, it will not be
released until it has been idle for this amount of
time. This means that if data is being constantly
sent over a PPP connection, the connection will
never be dropped and any data that needs to use a
second PPP connection may never be set.
Click Submit to save the changes you have made to this Web page. Click
Reset to leave all fields unchanged.
Creating and Configuring Servers
Each connection in the tree on the left-hand side of the LAN/WAN Web page can
contain one or more servers. Each server can provide email (SMTP) service, a
WebBinder destination, LNS uplink services, or time services. A single server
may provide multiple services. By default, the LAN connection contains the
Turnaround Address server with the WebBinder service (to allow the i.LON
100 to be bound to itself) and a sample email server called
mymailserver.mydomain.com. Each of the sample dial-up connections also
contains a sample email server. To create a server, follow these steps:
1. Open
the LAN/WAN page by hovering your mouse cursor over Network and
selecting LAN/WAN from the drop-down menu.