Echelon i.LON 100 e2 Internet Server - Manual (Page 69)

i.LON 100 Internet Server User’s Guide 5-3
SNTP servers: 0.0.0.0
Time zone: (GMT-08:00) Pacific Time (US &
Canada); Tijuana
LNS Servers: 0.0.0.0:1628
Incoming RNI port: 1628
LonTalk address: unconfigured
Email server: 0.0.0.0
Source email address: [blank]
CENELEC enabled: false (Power line model only)
All XML configuration files, as well as the contents of the /root/PulseBackup
(pulse count data), /root/AlarmLog (alarm log data), and /root/data (data
log data) directories will be backed up to a /root/config/software.bak.
This will restore the IP address back to 192.168.1.222, so you will need to
place your computer on that subnet or use the route command as described in
Connecting and Configuring the i.LON 100 Internet Server in Chapter 4, in order
to communicate with the i.LON 100 server after the reboot is complete.
Viewing i.LON 100 System Information
To view i.LON 100 system information, over your mouse cursor over Setup and
select System Info from the drop-down menu. The following Web page appears:
Click Reset to reload the entire page. Click Refresh to refresh the data on the
page.
This web page is divided up into model information and flash information. The
two sections are described below: