Echelon i.LON 100 e2 Internet Server - Manual (Page 66)

4-24 Configuring the i.LON 100
Bus device will update the data point on the
i.LON 100 at the specified interval. M-Bus
devices cannot send event-driven updates, so
they must be polled. This value can be set from
0.0 to 6553.4 seconds, with a resolution of .1
seconds. Setting this value to 0.0 will turn off
polling. By default, this value is 30 seconds.
Click Help for more information on using this web page.
See Chapter 7 of the i.LON 100 User’s Guide: Configuring the i.LON 100
Applications Using the i.LON 100 Configuration Plug-in for an example of using
the M-Bus driver with the Type Translator functional block to read and write M-
Bus data.