Echelon i.LON 100 e2 Internet Server - Manual (Page 58)

4-16 Configuring the i.LON 100
from the i.LON 100, you must also create one or more dial-up connections, as
described in Creating and Configuring a Dial-up Connection, earlier in this
chapter. To support dial-in connections, you must set the Enable Dial-in option
on the Security Web page (see Chapter 6).
If your i.LON 100 Internet Server is equipped with a modem or attached to an
external modem, configure it by hovering your mouse cursor over Setup and
selecting Modem from the dropdown menu. The Modem Web page appears as
shown in the following figure:
This page contains the following options:
Modem
Select what modem will be used by the i.LON
100. Select Internal Analog to use the internal
modem. Select External GSM Nokia 30 to 31
Series, External GSM Siemens 35 to 45
Series, or External GSM Insys GPRS 4.0 to
4.1 Series to use an external modem connected
via the serial port.
Note that many GSM service provider contracts
do not include provisions for establishing data-
only connections. Contact your GSM provider to
assure that you have data-only connections
activated for your GSM contract.
User Name For
Incoming Calls
Field Length: Up to 30 characters.
The user name for incoming calls. This user
name must be provided by the caller when
attempting to connect to the i.LON 100 server via
modem. By default, the user name is ilon.