Echelon i.LON 100 e2 Internet Server - Manual (Page 75)

i.LON 100 Internet Server User’s Guide 6-3
place it on the 192.168.1.* subnet or enter the following command in the
Windows Command Prompt window:
route add 192.168.1.0 mask 255.255.255.0 %COMPUTERNAME%
This command allows your computer to communicate with the i.LON 100 server
even when they are not on the same subnet. This command does not persist
through computer reboots, but you can add it to the startup script for your
computer.
When in security access mode you can access the Security and Restore Factory
Defaults Web pages. The i.LON 100 Web server is always enabled in security
access mode regardless of the Enable Web Server property described in the
following section.
i.LON 100 Security Web Page
To access the Security Web page, perform a security access reset as described
above, point your browser to 192.168.1.222, and click Security. The following
Web page opens:
This Web page allows you to set the following properties (all fields marked with
an asterisk require a reboot before the new values take full effect):
Enable This
Page Without
Security
Access Reset
Set this option to allow the properties on this page to be
modified without a security access reset. Note that this will
significantly effect the security of the i.LON 100.
FTP User
name
The FTP user name for the i.LON 100 server. This defaults
to ilon. The user name can be up to 20 characters long and
may contain letters, numerals, and the underscore character.
FTP
Password/Re-
enter
Password
The FTP password for the i.LON 100 server. This defaults
to ilon. The password will appear as asterisks. The
password can be up to 20 characters long and may contain
letters, numerals, and the underscore character. Reenter
the password in the Re-enter Password field.