Echelon i.LON 100 e2 Internet Server User Manual

Page 49

i.LON 100 Internet Server User’s Guide

4-7

2. Configure the following properties (all fields marked with an asterisk require

a reboot before the new values take full effect):
Automatically Obtain IP

Address

Set this option to have the i.LON 100 server

obtain its IP address, subnet mask, and

default gateway from the local network’s
DHCP server. If this option is set, the user

has the option of obtaining the Domain
Suffix (on the General LAN/WAN properties

Properties, above) and/or Default DNS
Server (on this page) automatically by

setting the associated Obtain
Automatically checkboxes. If you change

this value, you must reboot the i.LON 100
server for the change to take effect.
If the DHCP server cannot be contacted, the

IP Address, Subnet Mask, and Default

Gateway will be temporarily set to
192.168.1.222, 255.255.255.0, and

192.168.1.222, respectively. As soon as the
DHCP server is contacted, the i.LON 100

device will reboot itself to take on the new IP

address.

Manually Configure IP
Settings

Set this option when specifying a static IP
address, subnet mask, and gateway for the

i.LON 100 server in IP Address, Subnet
Mask, and Gateway. This is the default

setting.

LAN IP Address

Static IP address used by the i.LON 100

server if Manually Configure IP Settings is
set. If you are using a static IP address, be

sure that it is not in a range reserved by a