Aiwa HV-MX100U - Manual (Page 23)

OTHER FUNCTIO
Ï.
J
Multichannel TV Sound
(MTS) and Hi-Fi audio sound
system _________________
CHANNEL
V' I
REC/O TR
(3D (3D CZ5
(S
Multichannel TV Sound (MTS)
This! VCR is equippecj with the MTS (Muiti-channei TV
Soun(j) system which decodes stereo and SAP (Second
Audio Program) broadcasting signais. it aiso decodes the
stereo TV sound of the iocai CATV system if it satisfies the
assigned cabie frequencies and EiA-recommended MTS
stereo/biiinguai TV sound system.
it can record and piay back the audio signai in the VHS Hi-Fi
audio sound system. ,
Recording and piaying back the MTS broadcasting is set
using the AUDiO SETUP Menu.
Second Audio Program (SAP)
This VCR can record and piay back a Second Audio
Program (SAP) for the second ianguage or additional
information. Usually primary language is recorded on the
primary sound channel, and the second language or
additional information on the SAP channel.
Audio track system
This VCR records a regular monaural audio signal on the
normal audio track, and stereo Hi-Fi audio signal on the Hi­
Fi audio track.
If you use the VCR equipped with the VHS Hi-Fi audio
sound system to play back the tape recorded on this VCR,
you can enjoy stereo Hi-Fi sound or bilingual program. If you
use the VCR not equipped with the VHS Hi-Fi audio sound
system, only a regular audio sound recorded on a normal
audio track is played back.
Monaural sound
Hi-Fi sound and video signais
Normal audio track
Hi-Fi audio track
Recording the Hi-Fi audio
The regular audio signal and Hi-Fi audio signal are
automatically recorded if the TV program is broadcasted in
stereo. No special setting is required for Hi-Fi audio
recording.
Fiecording Iho sound of the \11 S
13 loaded si
Before starting
Insert a cassette with its erasure prevention tab and select
the tape speed.
1
Press MENU.
2
Press A/T to move the cursor ( ( ? ) to AUDIO
SETUP, then press ►.
""{““PRO G RAM TIM ER
2 CLO CK SET
¿3 CO LO R SYSTEM
p4- AUDIO SETUP
^5 VCR SETUP
6 LANG UAG E
7 CHANNEL SET
SELECT;
ENTER
END ; P®
3
Press A/T to move the cursor ( ( ? ) to
BROADCAST SYSTEM.
AUDIO SETUP :
AUDIO M O NITO R
•STEREO • L •R,
AUDIO M O DE
•HI-FI -NO RM AL
-»^BRO ADCAST SYSTEM
»STEREO -SAP -M O NO
SELECT : PT«A
SET.DATA: P^«^
END : PlO K)
4
Press ◄/► to select the desired system.
STEREO: for recording the stereo sound
SAP: for recording the SAP program
MONO: for recording the monaural sound
5
Press OK to return to the normal screen.
6 Press CHANNEL /V/'V' or number buttons to
select the channel to record.
“STEREO” and/or “SAP” appears in the display window
depending upon the receiving program.
7
Press • REC/OTR.
Recording begins.
CONTINUE.
ENGLISH 2 2