Aiwa HV-MX100U - Manual (Page 20)

To stop, pause, or turn off the power
while recording
Press ■ STOP, II PAUSE/STILL, or POWER.
Recording with One-Touch Recording (continued)
To extend the recording duration while
recording
Press • REC/OTR until the new duration you want
appears.
.
.
• When the regular recording is resumed by pressing • REC/
OTR repeatedly, One-Touch Recording is canceled.
• If the tape reaches the end during One-Touch Recording, ©
flashes in the display window.
• When timer recording is in progress, if you try to program
another One-Touch Timer Recording for later, 0 will appear
to indicate that your prior recording is stiil in progress. ,
Setting the timer
You can set up to six programs within one month of the
current date.
Before setting the timer ’
• Check that the VCR clock is set correctly.
• Insert a cassette with its erasure prevention tab in place.
Make sure the tape is longer than the recording time.
• To set the timer for a CATV (or satélite) channel, check
that the CATV (or satélite) receiver is turned on and the
channel you want to record is selected.
• Check that the REC SYSTEM button corresponding to the
color system in which you want to record is pressed.
1
Press MENU.
2
Press A/T to move the cursor (t? ) to
PROGRAM TIMER, then press ►.
4 MfcNU
PRO G RAM TIM ER
^ CLO CK SET
3 CO LO R SYSTEM
4 AUDIO SETUP
5 VCR SETUP
6 LANG UAG E
7 CHANNEL SET
SELECT: PT»A
ENTER ; IP ►
END : IPlO K)
3
Press A/T to move the cursor ( t ? ) to the line on
which no program has been set, then press
1 9
ENGLISH