YSI 6200 - Manual (Page 65)

YSI 6200 DAS USER Manual
YSI/Massachusetts 508.748.0366, Fax 508.748.2543 Page 6-10
6.5 Installing Cellular Modem Communication Link
The cellular phone modem package includes a full duplex wireless data transmission system
installed within the DCP enclosure. The modem is factory-installed, and programmed with the
cellular phone number you provided to YSI before it was shipped.
Mount the cellular antenna provided with the system to a suitable mounting structure. Connect
the antenna to the N-type connector on the bottom of the 6200 DCP enclosure.
You must supply a compatible base station modem and any required telephone and serial cables.
This modem may be external to your computer or may be installed internally. Refer to Figure
6.12 below.
Figure 6.12 Cellular MODEM Installation Example
Solar
Radiation
Battery
(charged Solar or AC)
6200
Data Collection Platform
6-Series Sonde
Cellular Modem
Wind Speed/Direction
Relative Humidity
Air Temperature
Water Temperature
Conductivity
Dissolved Oxygen
pH
ORP
Depth/Level
and more...
Field Cellular
Antenna
Barometer
Field Station
Computer with
EcoWatch DCP
Modem*
Base Station
Telephone
lines
Cellular Provider
serial cable
* Note: modem may reside inside PC