YSI 6200 - Manual (Page 22)

YSI 6200 DAS USER Manual
YSI/Massachusetts 508.748.0366, Fax 508.748.2543 Page 2-13
After completing the scan of SDI-12 sensors, the software switches to a ConfigWizard screen
that shows the status of the scan of meteorological sensors. If a MET sensor requires entry of a
calibration constant, a screen appears. Only the solar radiation sensor and barometer sensor
require a calibration constant, which is provided in the sensor literature or included in the back of
the manual. Each time you make a New 6200 file you will need to enter these calibration
constants. A good place to save these calibration constants is with the manual. Below you see
the MET status window and the screen for entering the calibration constants for the solar
radiation sensor (pyranometer) and the barometer.
Enter the numbers from the certificates, then click on Next and proceed to the next screen in
ConfigWizard.