TeeJet Matrix 840G User Manual - Manual (Page 51)

●
46
REALVIEW GUIDANCE
RealView Guidance allows live video input to be
displayed instead of a computer-generated image.
If a Video Selection Module (VSM) is installed on the system, two
video options are available:
• One Camera View - one of up to eight camera inputs can be
selected to change the view of the video input.
• Split Camera View - one of two sets of four camera inputs
(A/B/C/D or E/F/G/H) can be selected to divide the screen into
four separate video feeds.
From this screen one can enter guidance over video and steering
angle modes.
On Screen Guidance
Guidelines
►Orange Line – active guidance line
►Black Lines – adjacent guidance lines
RealView Guidance
To access the RealView Guidance screen.
1. Press HOME BUTTON or press the screen to activate the
icons and select HOME ICON in bottom left corner of screen.
2. Select REALVIEW GUIDANCE from Home Menu .
NOTE If a VSM or single camera is not installed, RealView
Guidance will be unavailable from the Home Menu
km/h ha
0.53 14.6
5.8
Camera Select
Split Screen
Guideline Adjustment
Guidance Bar
Status Bar
Navigation Guidelines
Full Screen
Guidance Over Video
Steering Angle
Home/Menu Options
or press Home Button
Figure 3-45: Overview of RealView Guidance
Figure 3-46: Home Menu - RealView Guidance
Swath ha
0.0 0
0.0
Full Screen
Full Screen mode allows the video feeds to be broadcast across
the entire screen. Guidelines and Steering Angle will be displayed.
Guidance Bar and Status Bar will not be displayed.
To activate Full Screen mode:
1. Press the screen to activate the icons and select the FULL
SCREEN ICON .
To exit Full Screen mode:
1. Press anywhere on the screen.