TeeJet Matrix 840G User Manual - Manual (Page 22)

17
98-05188 R2 www.teejet.com
PRN
Location PRN
Western US 135
Eastern US 138
Central US 135 or 138
South America N/A
Europe 120 or 124
GGA Requirements
GGA Quality required to be able to work with various types of signal
can vary. See table below for requirements.
Service GGA Quality Accuracy
Omnistar HP/XP 5 10 cm
RTK 4 4 cm
Glide 9 <1 m
WAAS/EGNOS/Beacon 2 <1 m
GPS only 1 <3 m
Console
Console Setup is used to confi gure Volume, LCD Brightness, Screen
Calibrate and Screenshot settings, as well as view About information
and Save system software information.
1. Press SYSTEM SETUP TAB
2. Press CONSOLE ICON .
3. Select from:
►Volume – adjusts the volume level of the audio speaker
►LCD Brightness – adjusts the brightness of the console
display
►Touch Screen Calibration – used to force a touch screen
calibration
►Screenshot – allows screen images to be saved a USB
drive
►About/Save – displays the system software version as well
as the software versions of modules connected to the CAN bus
OR
Press PAGE RIGHT ARROW to cycle through all settings.
NOTE: While in a setting screen, press icon to view available factory
settings and setting ranges.
Figure 2-19: Console
Volume
Volume adjusts the volume level of the audio speaker.
Range is 0 - 100.
1. Press CONSOLE ICON .
2. Press VOLUME ICON .
3. Press the PLUS/MINUS ICONS to adjust volume level.
◄Higher the number, the louder the sound.
◄Lower the number, the softer the sound.
4. Press
►PAGE RIGHT ARROW to proceed to LCD Brightness.
►SYSTEM SETUP TAB to return to main System Setup
screen.
NOTE: Press & hold PLUS/MINUS ICONS to quickly adjust
settings.
Figure 2-20: Volume