TeeJet LH 85 - Manual (Page 52)

J OB F UNCTION O PERATORS MANUAL FOR THE LH 85 S PRAY C ONTROLLER
5.2 LH A GRO
GENERAL JOB & COUNTER INFORMATION
There are 3 different counter sets in the LH 85 Spray Controller. Each job and
counter set can be stored as a file on the system for retrieval at a later date.
Jobs: Up to 16 different jobs are available.
Each job can be started and stopped independently of the other
jobs.
Each individual job can be viewed, printed, stored or cleared.
Each job stores the following information:
Nozzle: The nozzle type for the job.
Application rate: The required application rate for the job.
Start: The date & time that the job was started.
Stop: The date & time that the job was stopped.
Spray area: The area sprayed for the job.
Spray distance: The distance covered for the job.
Spray time: The time the job took in hours &minutes.
Spray volume: The amount sprayed
Campaign: A total counter for e.g. the season.
Data is constantly added to the campaign counter as work
proceeds.
The campaign counter can be viewed, printed, stored or
cleared.
A password is required to clear the campaign counter.
The campaign counter stores the following information:
Area: The area sprayed since the counter was
cleared.
Volume: The volume sprayed since the counter
was cleared.
Time: The time in hours & minutes for which the
sprayer has been spraying.
Max. speed: The maximum forward speed registered
by the system.