TeeJet LH 85 - Manual (Page 46)

S ETTINGS O PERATORS MANUAL FOR THE LH 85 S PRAY C ONTROLLER
4.22 LH A GRO
Regulation valve capacity:
Encode the capacity of the regulation valve in litres per minute.
Regulation start delay:
Encode the delay in seconds from when the main valve is switched on until
regulation starts.
Minimum forward speed:
Encode the forward speed in kilometres per hour at which the system should
automatically switch the main valve OFF.
Manual regulation speed:
Encode in percent of the regulation valve time how fast the regulation valve should
move in manual operation.
TANK
Settings related to the main sprayer tank are encoded her. A description of the
available settings follow:
MAXIMUM TANK CONTENT
Encode the maximum possible tank content in litres.
AUTO FILLING
Pressing the ENTER when this setting is highlighted switches automatic tank filling
on and off.
ELECTRIC AGITATION
Pressing the ENTER key toggles between switching the automatic tank agitation
start/stop function on and off.
MINIMUM TANK VOLUME
Encode the tank content at which tank agitation should automatically be switched
off.
AUTO FILLING OFFSET
Encode the volume in litres that will still run into the tank after the fill valve has
started shutting.
ALARM CONFIGURATION
The different warnings available are configured in this menu. The available
warnings are described in the following:
MINIMUM TANK CONTENT ALARM
Encode the tank level, in litres, at which the tank content warning should be given.