TeeJet LH 85 - Manual (Page 39)

O PERATORS MANUAL FOR THE LH 85 S PRAY C ONTROLLER S ETTINGS
LH A GRO 4.15
OEM SETUP
The OEM setup menu is password protected as the settings in this menu are
directly related to the equipment fitted to the sprayer. All of the settings in
the OEM setup menu are normally encoded when the LH 85 controller
system is fitted to the machine and should not need altering thereafter.
For work and machine related settings please refer to the respective
sections in this manual.
The OEM menu structure is as follows:
Regulation details
Nozzle spacing
Anticipation factor
Default valve position
Reg. valve capacity
Boom
Tank
Nozzles per section
Boom sections
Min. voltage
Regulation valve time
Reg. dead band
Number of sections
Section 1 - 9
Min. Reg pressure
Max. Reg pressure
Regulation backlash
Select unit Unit
Presence
Sensors
Calibration Calibrate sensors
Select sensors
Regulation start delay
Min. speed
Manual reg. speed
Max tank content
Auto filling on/off
Elec. Agitation on/off
Min. tank volume
Auto filling offset
Min. tank content
Flow/press. check
Printer
RS-232
Motor man. on/off
Alarm config
Communication
Motor management
Setup
User
Machine
OEM
Console
Regulation values Select valve type
Section valves Select valve type