TeeJet TASC-6600 - Manual (Page 74)

D-6
TASC-6000, 6300, 6600 98-05010
Rev. - 1
D.2.7. HANDGUN MODE, PRINTER OUTPUT SAMPLES
The following two sample printouts show the typical printouts in the HANDGUN MODE. The one on the left shows
metric units and the one on the right shows english units.
D.3. NORMAL MODE OPERATION
D.3.1. NORMAL MODE, AUTOMATIC "PRESSURE" OPERATION
The TASC console can be setup to control to a desired pressure. As boom sections of a balanced sprayer are turned on
and off, the control valve will open and close to maintain a flow rate that will give a constant pressure. The control
valve will adjust according to boom width only. SPEED will not adjust the carrier flow rate.
A. To enter this mode do the following:
MODE SELECTOR SWITCH CARRIER APPL. RATE
MODE SWITCH SETUP.
Use INC/DEC SWITCH to set rate to 0.0
MODE SWITCH
OPERATE.
B. Console will read "Flow Contl OFF Auto".
MIDWEST TECHNOLOGIES, INC.
TASC- 6300 SPRAY CONTROL
APPLICATION RATES:
CHEM.1 = 39.92 L/100L
CHEM.2 = 4.99 L/1000L
CHEM.3 = 4.99 L/1000L
CARRIER = . 0 L/MIN
VOLUME APPLIED:
CHEM.1 = 38.46 LITERS
CHEM.2 = 38.25 LITERS
CHEM.3 = 37.87 LITERS
CARRIER = 3038 LITERS
AREA COVERED:
FIELD = 10.04 HA
TOTAL = 1.8 HA
CHEM. DESCRIPTION
CHEM.1 = ...............................
CHEM.2 = ...............................
CHEM.3 = ...............................
WEATHER DATA:
TEMP............... %-HUMD...........
WND....................DIR. ................
FIELD# ....................................................
REF. # ......................................................
DATE:......./........./........ TIME: ..... : .......
OPER. .....................................................
MIDWEST TECHNOLOGIES, INC.
TASC- 6300 SPRAY CONTROL
APPLICATION RATES:
CHEM.1 = 511.1 OZ/100 GAL
CHEM.2 = 64.0 OZ/100 GAL
CHEM.3 = 64.0 OZ/100 GAL
CARRIER = . 0 GAL/MIN
VOLUME APPLIED:
CHEM.1 = 10.16 GAL
CHEM.2 = 10.11 GAL
CHEM.3 = 10.01 GAL
CARRIER = 803 GAL
AREA COVERED:
FIELD = 27.50 ACRES
TOTAL = 7.2 ACRES
CHEM. DESCRIPTION
CHEM.1 = ...............................
CHEM.2 = ...............................
CHEM.3 = ...............................
WEATHER DATA:
TEMP................ %-HUMD...........
WND....................DIR...................
FIELD# ....................................................
REF. # .......................................................
DATE:......./........./........ TIME: ..... : .......
OPER. ......................................................