Solvline Eddy DK - Manual (Page 148)

Eddy DK Programmer Guide
148
9.3.7 Eddy-BT v2.1 Specifcatons
Classification Specification
Interface Bluetooth v2.0+ EDR Class 1
Profile SPP (Serial Port Profile)
Max, TX Power +18dBm
RX sensitivity -88dBm
Power
Supply voltage: 3.3V DC
Supply current::10mA – 60mA
Operating Temp Operating temperature: -30 ~ 80 o C
Storage Temp Storage temperature: -40 ~ 85
o
C
Humidity Humidity : 90% (Non-condensing)
Working distance
Stub Antenna (+1dBi) - Stub Antenna (+1dBi) 100 meters
Stub Antenna (+1dBi) - Dipole Antenna (+3dBi) 150 meters
Dipole Antenna (+3dBi) - Dipole Antenna (+3dBi) 200 meters
Dipole Antenna (+3dBi) - Dipole Antenna (+5dBi) 300 meters
Dipole Antenna (+3dBi) - Patch Antenna (+9dBi) 500 meters
Dipole Antenna (+5dBi) - Dipole Antenna (+5dBi) 400 meters
Dipole Antenna (+5dBi) - Patch Antenna (+9dBi) 600 meters
Patch Antenna (+9dBi) - Patch Antenna (+9dBi) 1,000 meters
Approvals CE Class A, FCC Class A, RoHS Compliant
9.3.8 Eddy-CPU/mp v2.5 / v2.5 32bit Specifications
구분 규격
Hardware
CPU AT91SAM9G20 (400 MHz)
Memory 8MB Data Flash, 32 MB SDRAM, 64MB SDRAM
External I/F 16 Bit / 16 Bit Data Bus
Ethernet I/F 10/100 Base-T Auto MDI/MDIX
UARTs
4 Port, Support up to 921.6 Kbps
(1 : Full Signal, 2,3,4, : RxD, TxD, RTS, CTS only)
USB 2.0 FS 2 Host /1 Device Port, 2.0 FS (12Mbps)
ADC 4-Channel 10 Bit ADC
TWI(I2C) Master, Multi-Master and Slave Mode
SPI
8- to 16-bit Programmable Data Length
Four External Peripheral Chip Selects
GPIO Max. 56 Programmable I/O Pins
Power Input 3.3 V (200 mA Max)
Dimensions 59.75 x 44.6 X 1.0 mm
Weight 8.3 g