Solvline Eddy DK - Manual (Page 136)

Eddy DK Programmer Guide
136
1) Copy usb_recovery_xxx.zip file to any folder (e.g. C:\SystemBase\USB_recovery) from
SDK\Windows\USB_recovery folder in DK Board CD. (Refer to the Eddy official community site
http://www.embeddedmodule.com)
2) Among files extracted copy isp-extram-at91sam9260.bin file to the below folder. C:/Program Files/ATMEL
Corporation/AT91-ISP v1.12/SAM-BA v2.8/lib/AT91SAM9260-EK
3) Among files extracted copy below listed files to the firmware folder in DK source code folder.
eddy-bl-2.1.x.x.bin (Boot Loader)
eddy-bs-2.1.x.x.bin (Boot Strap File Name)
eddy-os-2.1.x.x.bin (Kernel File Name)
eddy-fs-2.1.x.x.bin (File System File Name)
4) Among files extracted Eddy_burning_DataFlash.bat file performs transferring firmware to Eddy-DK board
by executing a TCL file then creates a log file. In this file eddy-bl-2.1.x.x.bin file name should be same with
the name of the file copied.
5) Among files extracted Eddy_burning_DataFlash.tcl file performs transferring firmware to Eddy DK v2.1
board. In this file eddy-bs-2.1.x.x.bin, eddy-os-2.1.x.x.bin, and eddy-fs-2.1.x.x.bin file names should be
same with the names of the files copied.
…
####################################################################
# Main script: Load the linux demo in DataFlash,
# Update the environment variables
####################################################################
array set df_mapping {
bootstrapFileName "
eddy-bs-2.1.X.X.bin "
kernelFileName " eddy-os-2.1.X.X.bin "
filesystemFileName " eddy-fs-2.1.X.X.bin "
sam-ba.exe \usb\ARM0 AT91SAM9260-EK Eddy_burning_DataFlash.tcl ./ eddy-bl-2.1.x.x.bin > logfile.log
notepad logfile.log