SilentKnight EVS - Manual (Page 31)

EVS Device Installation
LS10062-001-SK-E 4-9
2. Insert Microphone cord through hole at the bottom of the dead front panel. See
Figure 4-9.
Figure 4-9 Microphone Cord Inserted Through Dead Front Panel Hole
3. Attach strain relief clip to microphone cord. The strain relief clip should have about
2-3/4” of micro phone cord through it. See Figure 4-10.
Figure 4-10 Installing Strain Relief Clip
4. Push the strain relief into the hole in the dead front panel.
2-3/4”