SilentKnight 5104 Digital Alarm Communicator Transmitter 6 Zone - Manual (Page 36)

Model 5104B Installation Manual 151053-L8
6-6
Step 21 Report Sprnk #3 Yes or No No
Set how zone 3 will report. Press any numeric-
digit to toggle the selection from Yes to No.
Yes = If you want to report troubles and alarms
as a sprinkler (Supervisory), when using SIA
format.
No = If you want troubles and alarms to report
as fires (Alarm).
Note: Bells will only sound if “No” is select-
ed.
Step 22 Report Sprnk #4 Yes or No No
Set how zone 4 will report. Press any numeric-
digit to toggle the selection from Yes to No.
Yes = If you want to report troubles and alarms
as a sprinkler (Supervisory), when using SIA
format.
No = If you want troubles and alarms to report
as fires (Alarm).
Note: Bells will only sound if “No” is select-
ed.
Step 23 Report Sprnk #5 Yes or No No
Set how zone 5 will report. Press any numeric-
digit to toggle the selection from Yes to No.
Yes = If you want to report troubles and alarms
as a sprinkler (Supervisory), when using SIA
format.
No = If you want troubles and alarms to report
as fires (Alarm).
Note: Bells will only sound if “No” is select-
ed.
Step 24 Report Sprnk #6 Yes or No No
Set how zone 6 will report. Press any numeric-
digit to toggle the selection from Yes to No.
Yes = If you want to report troubles and alarms
as a sprinkler (Supervisory), when using SIA
format.
No = If you want troubles and alarms to report
as fires (Alarm).
Note: Bells will only sound if “No” is select-
ed.
Step 25 Latch Sprnk Yes or No No
Set how the sprinkler zone will operate. Press
any numeric-digit to toggle the selection from
Yes to No.
Yes = When the sprinkler zone shorts for a
duration longer than the Zone Response (set in
steps 39 through 44), the annunciator remains
active until reported or manually silenced.
No = When the sprinkler zone shorts for a
duration longer than the Zone Response (set in
steps 39 through 44), the zone will follow
system status and indicate a supervisory on
that zone for the duration of the faulted
condition.
Table 6-3: List of Programming Steps
Step # Task Choices Default