Casio EA-200 User Manual
Page 77
20031201
9-15
E-Con Graph Window Operations
(4) After the settings are configured is the way you want, tap [OK].
• This displays a dialog box like the one shown to the
right.
Sample 1
Sample 2
Sample
n
–1
Sample
n
Gph1
x
-axis Value
Value
Value
Value
Value
Gph1
y
-axis Value
Value
Value
Value
Value
Gph3
x
-axis Value
Value
Value
Undef
Undef
Gph3
y
-axis Value
Value
Value
Undef
Undef
Column
Data
Row Data
…
…
…
…
…
(5) Tap [OK].
• This outputs the sampled sound from the EA-200’s speaker.
(6) To terminate sound output, press the EA-200 [START/STOP] key.
(7) Tap [OK]. This returns to the Speaker Output window of step (1).
• To return to the E-Con Graph window, tap the [Stop] button.
Dropping E-Con Graph Window Data into a ClassPad Built-in Application
You can drag data from the E-Con Graph window and drop it into the Main application work
area, the List Editor window, or the Graph Editor window.
The following explains the type of data that can be copied using drag and drop.
k Selecting a Specific Graph on the E-Con Graph Window and Dragging It to
the Main Application Work Area
Regardless of which graph is selected, the above operation creates a matrix (
n
lines
҂ up to
6 columns;
n
= total number of samples) in the Main application work area, into which is
placed all of the graphs in the E-Con Graph window.
• If the maximum number of graphs are not on the display (less than three in the case of
Gph1, Gph2, Gph3; less than 2 in the case of Upper and Lower), data is not saved for the
unused graph(s). Data is saved in columns only for the displayed graph(s), and blank
columns are not included in the matrix for the unused graph(s).
• When the number of samples for Gph1, Gph2 and Gph3 (or Upper and Lower) are not the
same, matrix data is created in accordance with graph that has the greatest number of
samples. Unused cells for graphs that have fewer samples than the graph with the greatest
number of samples are filled with the data “Undef” (Undefined).
The following example shows how data is stored when there is data for Gph1 and Gph3 only,
and Gph1 has
n
number of samples.
20040201